Domoticz smart thermostat

Create a virtual device:

Name: Thermo 
Sensor type: Thermostat setpoint

Choose a IOT4SH01DS device for temperature sensor, in my case named it 'Nappali'.

Choose a IOT4SH01Relay device for controlling the central heating unit, in my case named 'futes'.

In the Setup-> More options -> Events

Insert this code:

--
-- Domoticz passes information to scripts through a number of global tables
--
--
-- 
--
-- https://www.iot4.eu/wiki

local heating_probe = 'Nappali' 
local thermostat_setpoint = 'Thermo'
local heating_unit = 'futes'

local hysteresis = 0.1

commandArray = {}


-- loop through all the devices
for deviceName,deviceValue in pairs(otherdevices) do
    if (deviceName== thermostat_setpoint ) then

        if tonumber(deviceValue) < tonumber(otherdevices[heating_probe]-hysteresis) then
        
            if (otherdevices[heating_unit] == "On") then
             --   commandArray['SendNotification']='Heating is off'
                commandArray[heating_unit]='Off'
                print("Heating is Off")
            end
            
        elseif tonumber(deviceValue) > tonumber(otherdevices[heating_probe]+hysteresis) then
            if (otherdevices[heating_unit] == "Off") then
                commandArray[heating_unit]='On'
            --    commandArray['SendNotification']='Heating is on'
                print("Heating is On")
            end
        end
    end
end

-- loop through all the variables
for variableName,variableValue in pairs(uservariables) do

end

return commandArray

The event type set to Lua and set the event to active.

If you remove the -- (lua remark) before the commandArray['SendNotification'] lines the Domoticz will be notify heating status changes.

If you want can use higher hysteresis than 0.1 celsius, just simply modify the Lua code.

When this all is ready you can simply set desired temperature with the Utility device thermo temperature.