IOT4SH01RELAY: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| (One intermediate revision by the same user not shown) | |||
| Line 5: | Line 5: | ||
===Hardware features:=== | ===Hardware features:=== | ||
*Switchable maximum voltage: 240V AC | |||
*Switchable maximum current: 2A | |||
*Power supply cable length: 1.5m | *Power supply cable length: 1.5m | ||
*Power supply voltage: 100V-240V | *Power supply voltage: 100V-240V | ||
| Line 12: | Line 14: | ||
*Yearly power consumption: 1.8 kWh | *Yearly power consumption: 1.8 kWh | ||
*Dimmensions: 85mm x 55mm x 35mm | *Dimmensions: 85mm x 55mm x 35mm | ||
=== Communication features === | |||
*802.11 b/g/n | |||
*soft-AP | |||
*Up to 5 different networks can be defined | |||
*Supports static IP | |||
*Scans for strongest network if more than one defined | |||
*MQTT enabled | |||
*Domoticz integration via MQTT | |||
*Home Assistant integration via MQTT | |||
*Fast asynchronous HTTP Server | |||
**Configurable port | |||
**Basic authentication | |||
**Web-based configuration | |||
**Relay switching data from the web interface | |||
**Websockets-based communication between the device and the browser | |||
**Backup and restore settings option | |||
**Upgrade firmware from the web interface | |||
*REST API (enable/disable from web interface) | |||
*GET and PUT relay status | |||
=== First time configuration === | |||
If the device dont find usable Wifi network, she will create a Soft AP to able configure the device. The name of this AP is starting IOT4SHxxxxxxxxxx , like on the picture. | |||
[[File:IMG 0705.PNG|400px]] [[File:IMG 0706.PNG|400px]] | |||
=== To connect this SSID use the default password: '''Littlepig''' === | |||
'''When your device was connected to the AP, need to open in the browser the address ''http://192.168.4.1/'' .''' | |||
[[File:IMG 0707.PNG|400px]] | |||
'''Use the default username: ''admin'' and password: ''Littlepig''. ''' | |||
If logged in successfully select the '''Wifi''' page. | |||
[[File:IMG 0712.PNG|500px]] | |||
# Set your SSID name | |||
# Set the password for it | |||
# ''' Update the configuration ''' | |||
# Reconnect the device to the network | |||
Latest revision as of 12:57, 7 April 2017
IOTSH01Relay series
Hardware features:
- Switchable maximum voltage: 240V AC
- Switchable maximum current: 2A
- Power supply cable length: 1.5m
- Power supply voltage: 100V-240V
- Power supply frequency: 50-60Hz
- Power consumption: 0.2 W
- Power supply protection: double protection
- Yearly power consumption: 1.8 kWh
- Dimmensions: 85mm x 55mm x 35mm
Communication features
- 802.11 b/g/n
- soft-AP
- Up to 5 different networks can be defined
- Supports static IP
- Scans for strongest network if more than one defined
- MQTT enabled
- Domoticz integration via MQTT
- Home Assistant integration via MQTT
- Fast asynchronous HTTP Server
- Configurable port
- Basic authentication
- Web-based configuration
- Relay switching data from the web interface
- Websockets-based communication between the device and the browser
- Backup and restore settings option
- Upgrade firmware from the web interface
- REST API (enable/disable from web interface)
- GET and PUT relay status
First time configuration
If the device dont find usable Wifi network, she will create a Soft AP to able configure the device. The name of this AP is starting IOT4SHxxxxxxxxxx , like on the picture.
To connect this SSID use the default password: Littlepig
When your device was connected to the AP, need to open in the browser the address http://192.168.4.1/ .
Use the default username: admin and password: Littlepig.
If logged in successfully select the Wifi page.
- Set your SSID name
- Set the password for it
- Update the configuration
- Reconnect the device to the network