IOT4SH02Relay

IOTSH02Relay series

Iot4sh02 points.jpg

Hardware features:

• Switchable maximum voltage: 240V AC
• Switchable maximum current: 2A
• Power supply cable length: 1.5m
• Power supply voltage: 100V-240V
• Power supply frequency: 50-60Hz
• Power consumption: 0.2 W
• Power supply protection: double protection
• Yearly power consumption: 1.8 kWh
• Dimmensions: 85mm x 55mm x 35mm
• Two relay 230V AC / 5A

Communication features

• 802.11 b/g/n
• soft-AP
• Up to 5 different networks can be defined
• Supports static IP
• Scans for strongest network if more than one defined
• MQTT enabled
• Domoticz integration via MQTT
• Home Assistant integration via MQTT
• Fast asynchronous HTTP Server
  • Configurable port
  • Basic authentication
  • Web-based configuration
  • Relay switching data from the web interface
  • Websockets-based communication between the device and the browser
  • Backup and restore settings option
  • Upgrade firmware from the web interface
• REST API (enable/disable from web interface)
• GET and PUT relay status

First time configuration

If the device dont find usable Wifi network, she will create a Soft AP to able configure the device. The name of this AP is starting IOT4SHxxxxxxxxxx , like on the picture.

To connect this SSID use the default password: Littlepig

When your device was connected to the AP, need to open in the browser the address http://192.168.4.1/ .

Use the default username: admin and password: Littlepig.

If logged in successfully select the Wifi page.

1. Set your SSID name
2. Set the password for it
3. Update the configuration
4. Reconnect the device to the network