GA-002: Difference between revisions

From IOT4
Jump to navigation Jump to search
No edit summary
 
(3 intermediate revisions by the same user not shown)
Line 3: Line 3:
== UBlox MAX-M8W based Multi GNSS module  ==
== UBlox MAX-M8W based Multi GNSS module  ==


Concurrent reception of up to 3 GNSS (GPS, Galileo, GLONASS, BeiDou)
'''UBLOX MAX-M8W GPS/QZSS GLONASS BeiDou 18Hz receiver Reference Board with SMA antenna connector for your mini UAV systems, Robots, RC, FPV,Arduino, Raspberry or other projects. Ultra small and light.'''
:- Industry leading –167 dBm navigation sensitivity
 
:- Combines low power consumption and high sensitivity
The MAX-M8 series of standalone concurrent GNSS modules is built on the exceptional performance of the u-blox M8 engine in the industry proven MAX form factor. With dual-frequency RF front-end, the u-blox M8 concurrent GNSS engine is able to intelligently use the highest amount of visible satellites from two GNSS (GPS, GLONASS and BeiDou) systems for more reliable positioning. The MAX-M8 series is ideal for performance driven applications. The MAX-M8 series provides high sensitivity and minimal acquisition times while maintaining low system power. The MAX-M8Q provides best performance for passive and active antennas designs. Sophisticated RF-architecture and interference suppression ensure maximum performance even in GNSS-hostile environments. The MAX-M8 combines a high level of integration capability with flexible connectivity options in a miniature package. This makes MAX-M8 perfectly suited for industrial applications with strict size and cost requirements. The MAX-M8Q is also halogen free (green) which makes it also a perfect solution for consumer applications. The DDC (I2C compliant) interface provides connectivity and enables synergies with most ublox cellular modules
:- Superior anti‑spoofing and anti‑jamming
 
:- UART, I2C interface
'''GA-002 MAX-M8W breakout board features:'''
 
*72-channel u-blox M8 concurrent GNSS receiver GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1, SBAS L1 C/A: WAAS, EGNOS, MSAS
*Industry leading –167 dBm sensitvity, navigation sensitivity –164 dBm
*Uart (Tx,Rx), and I2C interface
*Superior anti-spoofing and anti-jamming
*SMA antenna connector
*Time pulse LED
*Battery for HOT module start
*Dimensions: 25x35 mm
*Weight 6 gramm
*Fully assembled and ready to use
 
 
'''MAX-M8W features:'''
 
*72-channel u-blox M8 concurrent GNSS receiver GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1, SBAS L1 C/A: WAAS, EGNOS, MSAS
*Nav. update rate:
*Single GNSS: up to 18 Hz
*Concurrent GNSS: up to 10 Hz
*Position accuracy
*2.0 m CEP
*Acquisition1 Cold starts:         26 s 27 s
*Aided starts:                         2 s 4 s
*Reacquisition:                        1 s 1 s
*Sensitivity1 Tracking & Nav:       –167 dBm –164 dBm
*Cold starts:                             –148 dBm –147 dBm
*Hot starts:                              –156 dBm –156 dBm
*Assistance AssistNow GNSS Online
*AssistNow GNSS Offline (up to 35 days)
*AssistNow Autonomous (up to 6 days)
*OMA SUPL & 3GPP compliant
*TCXO Oscillator
*Built-In RTC crystal
*On-chip LNA
*Anti jamming Active CW detection and removal
*Memory Onboard ROM
*Supported Active and passive antennas
*Odometer Travelled distance


Multiple GNSS constellation usable with the development module with Windows location device or with serial interface.
Multiple GNSS constellation usable with the development module with Windows location device or with serial interface.
Can use it with Arduino and other development systems.
Can use it with Arduino and other development systems.
[[File:Ga002 méretek.png|thumb|300px|GA-002 size]]
Size: 25x35mm




Latest revision as of 21:05, 13 August 2017

GA-002

UBlox MAX-M8W based Multi GNSS module

UBLOX MAX-M8W GPS/QZSS GLONASS BeiDou 18Hz receiver Reference Board with SMA antenna connector for your mini UAV systems, Robots, RC, FPV,Arduino, Raspberry or other projects. Ultra small and light.

The MAX-M8 series of standalone concurrent GNSS modules is built on the exceptional performance of the u-blox M8 engine in the industry proven MAX form factor. With dual-frequency RF front-end, the u-blox M8 concurrent GNSS engine is able to intelligently use the highest amount of visible satellites from two GNSS (GPS, GLONASS and BeiDou) systems for more reliable positioning. The MAX-M8 series is ideal for performance driven applications. The MAX-M8 series provides high sensitivity and minimal acquisition times while maintaining low system power. The MAX-M8Q provides best performance for passive and active antennas designs. Sophisticated RF-architecture and interference suppression ensure maximum performance even in GNSS-hostile environments. The MAX-M8 combines a high level of integration capability with flexible connectivity options in a miniature package. This makes MAX-M8 perfectly suited for industrial applications with strict size and cost requirements. The MAX-M8Q is also halogen free (green) which makes it also a perfect solution for consumer applications. The DDC (I2C compliant) interface provides connectivity and enables synergies with most ublox cellular modules

GA-002 MAX-M8W breakout board features:

  • 72-channel u-blox M8 concurrent GNSS receiver GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1, SBAS L1 C/A: WAAS, EGNOS, MSAS
  • Industry leading –167 dBm sensitvity, navigation sensitivity –164 dBm
  • Uart (Tx,Rx), and I2C interface
  • Superior anti-spoofing and anti-jamming
  • SMA antenna connector
  • Time pulse LED
  • Battery for HOT module start
  • Dimensions: 25x35 mm
  • Weight 6 gramm
  • Fully assembled and ready to use


MAX-M8W features:

  • 72-channel u-blox M8 concurrent GNSS receiver GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1, SBAS L1 C/A: WAAS, EGNOS, MSAS
  • Nav. update rate:
  • Single GNSS: up to 18 Hz
  • Concurrent GNSS: up to 10 Hz
  • Position accuracy
  • 2.0 m CEP
  • Acquisition1 Cold starts:         26 s 27 s
  • Aided starts:                         2 s 4 s
  • Reacquisition:                        1 s 1 s
  • Sensitivity1 Tracking & Nav:       –167 dBm –164 dBm
  • Cold starts:                             –148 dBm –147 dBm
  • Hot starts:                              –156 dBm –156 dBm
  • Assistance AssistNow GNSS Online
  • AssistNow GNSS Offline (up to 35 days)
  • AssistNow Autonomous (up to 6 days)
  • OMA SUPL & 3GPP compliant
  • TCXO Oscillator
  • Built-In RTC crystal
  • On-chip LNA
  • Anti jamming Active CW detection and removal
  • Memory Onboard ROM
  • Supported Active and passive antennas
  • Odometer Travelled distance

Multiple GNSS constellation usable with the development module with Windows location device or with serial interface.

Can use it with Arduino and other development systems.

GA-002 size

Size: 25x35mm


Connecting TTL serial module

After connecting the device and want to use the Galileo network need to set the NMEA protocol version first:

Ucenter nmea.png

When the NMEA is set, need to enable the wanted GNSS constellations at the GNSS page:

Ucenter gnss.png

To save the configuration into the module select the CFG page, and save into the BBR (battery backuped ram)

Ucenter cfg.png

The module sending the NMEA sentences accross the serial port

Serial nmea.png

Example NMEA output

$GPGSV,4,1,13,02,12,046,50,05,24,071,49,12,07,127,39,16,09,306,25,0*6A
$GPGSV,4,2,13,20,24,126,49,21,40,201,,23,00,329,,25,48,133,46,0*68
$GPGSV,4,3,13,26,36,304,36,29,74,042,53,31,44,250,15,40,26,137,34,0*68
$GPGSV,4,4,13,41,09,111,44,0*5A
$GLGSV,3,1,10,70,02,353,23,71,16,039,42,72,11,088,37,77,41,181,,0*7A
$GLGSV,3,2,10,78,65,290,,79,29,326,23,81,17,245,,86,00,055,,0*7F
$GLGSV,3,3,10,87,52,038,44,88,66,276,24,0*7E
$GAGSV,2,1,07,02,65,271,15,11,54,057,43,12,06,057,31,14,,,48,0*49
$GAGSV,2,2,07,19,06,036,32,22,14,237,22,30,21,318,28,0*4A
$GNGLL,4753.61700,N,02022.78161,E,181629.00,A,D*79
$GNRMC,181630.00,A,4753.61699,N,02022.78159,E,0.060,,300317,,,D,V*18
$GNVTG,,T,,M,0.060,N,0.112,K,D*3C
$GNGGA,181630.00,4753.61699,N,02022.78159,E,2,12,0.76,174.4,M,38.4,M,,0000*43
$GNGSA,A,3,02,05,12,20,25,29,16,26,41,40,31,,1.26,0.76,1.00,1*0E
$GNGSA,A,3,79,87,71,72,,,,,,,,,1.26,0.76,1.00,2*05
$GNGSA,A,3,30,11,12,02,19,,,,,,,,1.26,0.76,1.00,3*0C
$GPGSV,4,1,13,02,12,046,50,05,24,071,49,12,07,127,39,16,09,306,25,0*6A
$GPGSV,4,2,13,20,24,126,49,21,40,201,,23,00,329,,25,48,133,46,0*68
$GPGSV,4,3,13,26,36,304,36,29,74,042,53,31,44,250,13,40,26,137,34,0*6E
$GPGSV,4,4,13,41,09,111,44,0*5A
$GLGSV,3,1,10,70,02,353,23,71,16,039,42,72,11,088,37,77,41,181,,0*7A
$GLGSV,3,2,10,78,65,290,,79,29,326,22,81,17,245,,86,00,055,,0*7E
$GLGSV,3,3,10,87,52,038,44,88,66,276,24,0*7E
$GAGSV,2,1,07,02,65,271,18,11,54,057,42,12,06,057,31,14,,,48,0*45
$GAGSV,2,2,07,19,06,036,31,22,14,237,22,30,21,318,29,0*48
$GNGLL,4753.61699,N,02022.78159,E,181630.00,A,D*7B
$GNRMC,181631.00,A,4753.61699,N,02022.78158,E,0.047,,300317,,,D,V*1D
$GNVTG,,T,,M,0.047,N,0.087,K,D*34
$GNGGA,181631.00,4753.61699,N,02022.78158,E,2,12,0.76,174.4,M,38.4,M,,0000*43
$GNGSA,A,3,02,05,12,20,25,29,16,26,41,40,31,,1.26,0.76,1.00,1*0E
$GNGSA,A,3,79,87,71,72,,,,,,,,,1.26,0.76,1.00,2*05
$GNGSA,A,3,30,11,12,02,19,,,,,,,,1.26,0.76,1.00,3*0C
$GPGSV,4,1,13,02,12,046,50,05,24,071,49,12,07,127,39,16,09,306,24,0*6B
$GPGSV,4,2,13,20,24,126,49,21,40,201,,23,00,329,,25,48,133,46,0*68
$GPGSV,4,3,13,26,36,304,36,29,74,042,53,31,44,250,20,40,26,137,34,0*6E
$GPGSV,4,4,13,41,09,111,44,0*5A
$GLGSV,3,1,10,70,02,353,22,71,16,039,42,72,11,088,37,77,41,181,,0*7B
$GLGSV,3,2,10,78,65,290,,79,29,326,22,81,17,245,,86,00,055,,0*7E
$GLGSV,3,3,10,87,52,038,44,88,66,276,23,0*79
$GAGSV,2,1,07,02,65,271,20,11,54,057,42,12,06,057,31,14,,,48,0*4E
$GAGSV,2,2,07,19,06,036,31,22,14,237,22,30,21,318,29,0*48
$GNGLL,4753.61699,N,02022.78158,E,181631.00,A,D*7B
$GNRMC,181632.00,A,4753.61700,N,02022.78161,E,0.018,,300317,,,D,V*1F
$GNVTG,,T,,M,0.018,N,0.033,K,D*31
$GNGGA,181632.00,4753.61700,N,02022.78161,E,2,12,0.78,174.4,M,38.4,M,,0000*45
$GNGSA,A,3,02,05,12,20,25,29,16,26,41,40,31,,1.29,0.78,1.02,1*0D
$GNGSA,A,3,79,87,71,72,,,,,,,,,1.29,0.78,1.02,2*06
$GNGSA,A,3,30,11,12,02,19,,,,,,,,1.29,0.78,1.02,3*0F
$GPGSV,4,1,13,02,12,046,50,05,24,071,49,12,07,127,39,16,09,306,24,0*6B
$GPGSV,4,2,13,20,24,126,49,21,40,201,30,23,00,329,,25,48,133,46,0*6B
$GPGSV,4,3,13,26,36,304,36,29,74,042,53,31,44,250,23,40,26,137,34,0*6D
$GPGSV,4,4,13,41,09,111,44,0*5A
$GLGSV,3,1,10,70,02,353,22,71,16,039,42,72,11,088,37,77,41,181,,0*7B
$GLGSV,3,2,10,78,65,290,,79,29,326,20,81,17,245,,86,00,055,,0*7C
$GLGSV,3,3,10,87,52,038,44,88,66,276,22,0*78
$GAGSV,2,1,07,02,65,271,21,11,54,057,42,12,06,057,32,14,,,48,0*4C
$GAGSV,2,2,07,19,06,036,31,22,14,237,23,30,21,318,29,0*49
$GNGLL,4753.61700,N,02022.78161,E,181632.00,A,D*73
$GNRMC,181633.00,A,4753.61700,N,02022.78163,E,0.014,,300317,,,D,V*10
$GNVTG,,T,,M,0.014,N,0.026,K,D*39
$GNGGA,181633.00,4753.61700,N,02022.78163,E,2,12,0.78,174.4,M,38.4,M,,0000*46
$GNGSA,A,3,02,05,12,20,25,29,16,26,41,40,31,,1.29,0.78,1.02,1*0D
Retrieved from "https://wiki.iot4.eu//wiki/index.php?title=GA-002&oldid=19728"